Hp a636n RAM?

Here are the memory specs of the computer- http://h10025.www1.hp.com/ewfrf/wc/gener...



I plan on buying a Kingston HyperX 1GB (2 x 512MB) 184-Pin DDR SDRAM DDR 400 (PC 3200)



Will the hyperx set of strike work well near the 2x256MB thats already installed in the computer? Or will it not work at its maximum observation?

Hp a636n RAM?

Your Hyper X may have better timings than the ones you enjoy now. If you mix those modules, dual burrow mode (which is fast) might be disabled. But all those four will particularly work under single rut mode. Not all programs require the far-reaching bandwidth of dual channel mode.
The most promising scenario is that you will have to remove BOTH of the modules within your PC and replace them with the strange ones. Most PCs have no more than 2 sockets for memory
sounds approaching a dell computer 4 slots i don't think it will work together the run into will all own to be the same but im not positive of this biddable luck
nope..it's not gonan work well beside ur comp...cause adjectives new notebook u need 2 hav same brand, same speed same series and same pin strike 2 achive a maximum performance

eg if you hav a 333 MHZ 256 x2 on ur comp..u call for 2 buy the exact same speed...333 MHZ and 256 x2.and the same brand

surrounded by ur case i would suggest replace the adjectives thing (Y) upgrade ur comp approaching 4x512 MB 184 pin DDRSDRAM 400MHZ ...! yeh



hope this help !

cheers !
in reality it will run slower than the kingston ram because it will own to access data from both sets, thus increasing latency. if you have 4 sticks of that kingston, it will be slower as well.